FAQ
Frequently asked questions about the heat battery
Question not listed? Ask it via the contact form and we will reply within 2 working days.
Suitability
Which companies is a heat battery suitable for?
For companies that use process heat above 120 °C as steam, thermal oil or hot water, and that also have surplus power at times, need to cut CO2 emissions or are held back by grid congestion.
Why does my heat demand need to be above 120 °C?
For heat below 100 °C, cheaper solutions exist, such as a heat pump or hot-water storage. The HyKro heat battery delivers heat up to 500 °C and comes into its own at higher temperatures, where water no longer works as a storage medium.
How does it differ from an e-boiler or a heat pump?
An e-boiler converts electricity directly into heat, but draws full power from the grid at the moment you need heat. An industrial heat pump is very efficient, but needs a heat source and is mainly suited up to about 100 to 150 °C. The heat battery charges when power is cheap or the grid has capacity and delivers the heat later, at high temperatures too. The technologies often complement each other. See the full comparison.
Technology
How does the HyKro heat battery work?
Heating coils in the storage vessel convert electricity into heat in a controlled way. That heat is absorbed by magnetite, an iron ore, up to 500 °C. A vacuum layer retains the heat. When needed, air flows along the hot vessel and releases the heat through a heat exchanger to your steam, oil or water system.
Is a heat battery the same as a thermal battery or sand battery?
Largely, yes. Heat battery, thermal battery and thermal energy storage are different names for the same principle: converting electricity into heat and storing that heat. A sand battery is a heat battery with sand as its storage medium. The HyKro heat battery uses magnetite, an iron ore with a higher heat storage density and better thermal conductivity than sand, heated by built-in heating coils. More about the technology.
How much energy does one module store?
One module stores up to 8 MWh of heat. It charges at up to 600 kW of electrical power and delivers heat at up to 200 kW.
How much heat is lost?
Thanks to the vacuum insulation, the battery loses 0.5 to 1% of its stored heat per day. Depending on the application, a round-trip efficiency of over 90% is achievable.
Which heating systems can the battery connect to?
Through a heat exchanger to a steam system, a thermal oil line or a water loop.
Installation
How much space is needed?
Per module, an outdoor spot along the facade for a vessel 3.5 metres in diameter and 9 metres high, plus an energy unit next to it. The filled vessel weighs about 100 tonnes and stands on a foundation. No extra building is needed.
Does anything need to change in my production hall?
No. The heat battery connects to your existing heating system. No changes are needed inside the hall, and your production does not have to stop.
Can I start small?
Yes. You can start with one module and expand later. Each module runs independently with its own controller and can be linked to further modules.
Operation
How much maintenance does the heat battery need?
Very little. There are no moving parts in the storage vessel. The fan and vacuum pump in the energy unit are standard industrial components with routine maintenance.
When does the battery charge?
The controller charges based on EPEX spot prices, your own generation or available grid capacity. You decide on the best strategy together with HyKro.
Is the heat battery safe?
The storage medium is magnetite, a natural iron ore: non-flammable, non-toxic and with no chemical reactions. The storage vessel is not pressurised and no fuel is stored.
Costs
What is the payback time?
For the first applications we work with a payback time of 4 to 5 years, with subsidies or tax relief in the Netherlands, Germany or Belgium. The exact payback depends on your gas use, power prices and usage profile; we calculate it for you in the heat battery quick scan.
Does the heat battery quick scan cost anything?
No, the heat battery quick scan is free and without obligation.
Does HyKro help with subsidy applications?
Yes. We find out which schemes apply to you in the Netherlands, Germany or Belgium, help prepare the application and provide the technical justification. See the 2027 schemes.
What is the energy simulation and what does it cost?
In the energy simulation HyKro models your entire energy system: generation, storage, power-to-heat conversion, grid contract, prices and subsidies. You get three scenarios, a site visit, a report and a presentation. The intake is free; the simulation itself costs €9,500 excl. VAT (introductory price), with a lead time of 4 to 6 weeks.
When do I choose the heat battery quick scan and when the energy simulation?
The free heat battery quick scan quickly tells you whether a heat battery suits you. Choosing between several technologies, or want to factor in your own generation and grid contract too? Then the energy simulation gives you fully substantiated advice.
Question not listed?
Just ask. We reply within 2 working days.